Looking to customize your ZEN20 Power Strip in Home Assistant?

The ZEN20 is fully integrated with the latest JS integration of Home Assistant. If you aren't on the JS integration yet, Home Assistant currently recommends handling Z-Wave devices through the new Z-Wave JS integration since all others have essentially been abandoned and / or discontinued.

All of the ZEN20 Power Strip's advanced settings should be available, but if you don't see all the settings, there is another way to make adjustments:

You can now change any parameter manually on the JS Z-Wave integration for Home Assistant. 

It needs to be done in Z-Wave JS UI and it’s not possible to do this within HA directly at the moment:

1. Under node, scroll down below any exposed settings for the device (under Configuration) to the Custom Configuration section as shown in the screenshot here, where you'll see Value, Parameter and Size.
2. You can enter the data according to the product documentation and click SET for the parameter to be updated.

Let us know if you have any problems! We'll be happy to help.