After installing the ZEN74 Toggle Dimmer and making sure it controls the connected load manually, it's time for inclusion!
Follow these steps to have your ZEN74 Toggle Dimmer included to Home Assistant:
- In Home Assistant: open Configuration > Integrations > Z-Wave JS > Configure.
- Click on Add node.
- Click on Start Inclusion to initiate pairing.
- Toggle the dimmer UP 3 times very quickly (LED indicator will start flashing)
- Home Assistant will confirm that the switch was added, and it will be immediately visible in your device list.
With the ZEN74 Toggle Dimmer successfully added, you begin programming rules and automations and customizing the advanced settings to your needs.
* If you’re using an S2 hub, it will ask you to enter the DSK PIN or scan the QR code printed on the metal faceplate of the switch to complete SmartStart inclusion.
Zooz products are now officially integrated with the new ZWaveJS integration of Home Assistant. If you're experiencing issues with accessing the advanced settings of your ZEN24 we would recommend first updating to the JS integration then excluding and re-including your device to your network in order for it to be recognized correctly.
If you are having trouble including the dimmer to your network, the first thing to try is exclusion which is a type of Z-Wave reset that can help the hub find the device.
Please don’t hesitate to send us a message if you need help pairing your ZEN74 to Home Assistant, or if you have any other questions!
