First thing's first. Check that the dimmer works fine when controlled manually.   

After that, we can move on to the Z-Wave part of the installation. We use the term "include" when we want to add or pair a device - it may be helpful to note since different Z-Wave hubs use different words for the same process. 

Here's how to include your Dimmer to your Z-Wave system:

1. Bring your Z-Wave gateway hub as close to the switch as possible
2. Put your Z-Wave controller into inclusion mode
3. Tap the upper paddle of the switch 3 times very quickly
4. A new dimmer switch will appear on your hub's device list

* If you’re using an S2 hub, it will ask you to enter the DSK PIN or scan the QR code printed on the metal faceplate of the switch to complete SmartStart inclusion.

If you try including the dimmer and find it doesn't add to your system, here's what to try first. 

Let us know if you have any questions during the process! We'll be happy to help.