How to Add Your ZEN76 S2 Switch to Your Z-Wave System

After testing your switch to verify it's working manually, let's include it to your Z-Wave system.

We call it "inclusion" but there are many words for it depending on the system you're using. Inclusion is just the process of adding or pairing a device to your Z-Wave system.

Here's how to include your ZEN76 Switch to your Z-Wave system:

1. Put your Z-Wave hub into inclusion mode (see your hub's manual for specific inclusion steps)
2. Tap the UPPER paddle 3 times quickly to finalize the inclusion process
3. A new on/off device will appear on your controller's device list

* If you’re using an S2 hub, it will ask you to enter the DSK PIN or scan the QR code printed on the metal faceplate of the switch to complete SmartStart inclusion.

If you try including the switch and don't see it appear on your device list, here's what to try.

If you have any questions about the process, don't hesitate to reach out!