Once you've got your ZEN37 Wall Remote in its final location, you can add it to Home Assistant by following the simple steps below:
- In Home Assistant: open Configuration > Integrations > Z-Wave JS > Configure.
- Click on Add node.
- Click on Start Inclusion to initiate pairing.
- Click the top button 6 times quickly.
- The LED indicator will blink blue during the process and light up green once added successfully. It will light up red if failed.
*If you’re using an S2 hub, it will ask you to enter the DSK key or scan the QR code printed on the back to complete SmartStart inclusion.
Once the switch has been added to your hub, you'll be able to create rules for it, control it remotely, and customize it via the advanced settings.
Zooz products are now officially integrated with the new ZWaveJS integration of Home Assistant. If you're experiencing issues with accessing the advanced settings of your ZEN37, we would recommend first updating to the JS integration then excluding and re-including your device to your network in order for it to be recognized correctly.
If you are having issues adding the switch to your network, the first thing to try is exclusion which is a type of Z-Wave reset.
Please don’t hesitate to contact us if you need help pairing your Wall Remote to Home Assistant, or if you have any other questions!
