Once your ZEN37 Wall Remote is added to Home Assistant, all of the advanced settings should display automatically. 

With the JS integration of Home Assistant, you should have access to all of its advanced settings once you've included the Wall Remote. If you aren't on the JS integration yet, Home Assistant currently recommends handling Z-Wave devices through the new Z-Wave JS integration since all others have essentially been abandoned and / or discontinued.

If you're not seeing certain settings, you can now change any parameter manually on the JS Z-Wave integration for Home Assistant. 

1. Under node, scroll down below any exposed settings for the device (under Configuration) to the Custom Configuration section as shown in the screenshot here, where you'll see Value, Parameter and Size.
2. You can enter the data according to the product documentation and click SET for the parameter to be updated.
3. If you have a battery-powered device, you'll need to wake it up by performing the same activation sequence as during inclusion.

After making the changes, be sure to wake up the switch manually to allow the changes to be registered immediately.

If you have any other questions, let us know! We'll be happy to help.