No configuration issues here! The ZEN20 will be recognized and configured correctly by the Z-Box out of the box, without a need for any custom drivers or special device handlers. Here is how you can access and change all of the advanced settings and parameters for your ZEN20 Power Strip on the Z-Box Hub.

Currently, the ability to adjust advanced settings for Z-Wave devices needs to be done in the WEB UI only, so please make sure you're logged in to your Z-Box Hub and connected to the same Wi-Fi network on your device / computer as the Z-Box Hub to make any changes to the advanced settings for the ZEN20.

1. Click on Settings (gear icon) in the sidebar navigation menu on your Z-Box web interface.

2. A new screen showing all of your devices will appear.

3. Click the arrow on the right side of the device you would like to modify. Always use the main device (and not the child devices) to modify settings.

4. Click on the Parameters tab in the settings view.

5. You'll see the settings for the device listed - simply click the arrow next to the setting you want to modify to make any changes. 

6. Click Save.

Please let us know if you have any questions about adjusting the settings for your ZEN20 Power Strip on the Z-Box Hub.