No special handlers or drivers needed here! You will have full access to the advanced settings for the ZEN30 simply by including the device to the Z-Box.

You can access and change the advanced settings for your Zooz dimmer in the Z-Box Hub's WEB UI. Follow the steps below to customize your device, including your preferred ramp rate and minimum or maximum brightness level.

First, log into your Z-Box Hub locally in the WEB UI with your computer connected to the same Wi-Fi network as the Z-Box Hub.

You can only adjust advanced settings for Z-Wave devices in the WEB UI at the moment.

1. Click on Settings (gear icon) in the sidebar navigation menu on your Z-Box web interface.

2. A new screen showing all of your devices will appear.

3. Click the arrow on the right side of the ZEN30 Double Switch.

4. Click on the Parameters tab in the settings view.

5. You'll see the settings for the device listed - simply click the arrow next to the setting you want to modify to make any changes. Here is the complete list of settings for this model.

6. Click Save.

If you need help navigating the settings screen, please let us know and our team will be happy to assist you.