We challenge you to find more bang for your buck! The Zooz ZEN16 MultiRelay combines 3 dry contact inputs and 3 dry contact outputs, making it one of the most versatile smart home devices out there so you can cut down on hardware and stay on budget.
From garage doors and gas fireplaces to sprinkler systems, pool pumps, and commercial gates, the MultiRelay can do it all. Check out the ZEN16 FAQ for answers to some of the most commonly asked questions about this versatile device!
With two 15 A dry contact relays and one 20 A relay, the ZEN16 MultiRelay is the answer for controlling up to 3 garage doors with a single unit (pair it with a Z-Wave tilt sensor to monitor open/close status of your door). We even have a dedicated Garage Door Opener app for Hubitat and easy to follow steps for SmartThings, making the programming part quick and easy.
If you’d like to automate your gas fireplace, pool pump, or commercial gate, the MultiRelay is capable of all of it and more. Use the MultiRelay to manage your sprinkler system via Z-Wave and connect it with the ZAC98 accessory relay to use your existing sprinkler timer as a trigger. Better yet, create custom if/then rules with your Z-Wave hub to trigger different events and scenarios, like having your sprinkler system turn on once your garage door closes in the morning.
Mount it on your wall using the built-in inserts, and connect wall switches if you’d prefer physical control of the connected devices. The MultiRelay is equipped with the 700 series chip and the latest S2 Authenticated security protocol for secure connections.
We have provided diagrams and instructions for the most common installation types (garage doors, sprinkler systems, etc.):
Garage Door Diagrams
Sprinkler System Diagrams
More Diagrams
- Gas Fireplace Wiring Diagrams
- Low-Voltage Landscape Lighting Wiring Diagrams
- Pool Equipment Wiring Diagrams
- Commercial Gates Wiring Diagram
- Universal Remote Control
That's not all! You're not limited to the installation types above. If you have an idea for a solution that you think the ZEN16 can assist with, our technicians would be happy to provide comprehensive installation support for the device and can create custom wiring and programming instructions once the product is registered in our Registration Portal. For the most expedient resolution, please ensure you provide as much detail as possible, including but not limited to the details below:
- Link, PDF manual, or model specifications to the device you want to connect to the Relay side of the ZEN16.
- Link, PDF manual, or model specifications to the device you want to connect to the Sw input side of the ZEN16.
- Detailed images of the wiring available (.JPG or .JPEG format) that show each connection in the installation.
- Details regarding how is the device you wish to control on the output/relay side is controlled currently (wall switch, remote control, etc.).
- Details on how you would like to be able to control the device with the ZEN16 (on/off control via Z-Wave only, automations, etc).
- Which Z-Wave hub system you're using so that we can verify compatibility.
The more details you can provide to our support team, the better and more expediently we can assist you!
