Before moving on to Z-Wave set up, check that your Double Switch works well when controlled manually from the physical light dimmer and on/off relay.
Once that's been confirmed (and if it's not working manually, see our wiring guide or reach out here), we can include the unit to your Z-Wave system.
There are many words for it depending on the system you're using, but the standard term we use is "inclusion." Inclusion is just the process of adding or pairing a device to your Z-Wave system.
Here's how to include your Double Switch to your Z-Wave system:
- Put your Z-Wave hub into inclusion mode (see your hub's manual for specific inclusion steps as each hub is different)
- While your hub is searching for a new device, tap the UPPER paddle on the dimmer 3 times quickly to finalize the inclusion process
- A new device will appear on your controller's device list
* If you’re using an S2 hub, it will ask you to enter the DSK PIN or scan the QR code printed on the metal faceplate of the switch to complete SmartStart inclusion.
If you tried including the Double Switch and don't get any inclusion confirmation of any kind, try this first.
If you have any questions about the process, let our team know! We're always here to help.
