Hubitat will recognize the ZEN16 MulitRelay out of the box as it is officially integrated. It will allow you to access the available advanced settings.
If you're having trouble with the built-in device driver for the Scene Controller, you can always give the community driver a try.
It will let you customize your MultiRelay: personalize things like switch types, built-in timers, and much more. First, confirm your Hubitat is up-to-date and you have the latest firmware update installed on your device.
Then, follow the directions below to install the community driver to adjust the settings for your ZEN16:
-
Open Hubitat in your browser.
-
Click on Drivers Code in the side menu.
-
Open Hubitat in your browser.
-
Click on Drivers Code in the side menu.
-
In the top right corner, click on "+New Driver" and paste the code from the following link to access the code for the driver, then copy ALL of the code from the page.
-
Click Save in the top right corner.
-
You'll see a Zooz ZEN16 Multirelay Advanced driver in your Drivers Code list now.
-
Assign the driver to the device by opening to the device view and selecting the Zooz ZEN16 Multirelay Advanced driver from the drop-down menu under Type* > User (scroll all the way down).
-
Click Update Device.
-
Don't skip this step: Click the Configure button, then Save, and reload the device view or refresh page for all of the new settings to appear.
-
You will now see the additional setting display in the device view in Hubitat where you can customize the device.
-
Once done, click Update Device again.
If you prefer not to use the custom driver, you can try out this Z-Wave Universal Device Scanner to access any parameters that may not be available yet in the custom driver. Please note that use of this driver is intended for expert users; use at your own risk: https://community.hubitat.com/t/release-z-wave-universal-device-scanner/97912
Let us know if you have any questions!
