Once you've mounted your Remote Switch in its final location, you can add it to Home Assistant:
- In Home Assistant: open Configuration > Integrations > Z-Wave JS > Configure.
- Click on Add node.
- Click on Start Inclusion to initiate pairing.
- Tap the upper paddle 6 times quickly (LED indicator will start flashing)
- The LED indicator will blink blue during the process and light up green once it's been added successfully. Home Assistant should also confirm the inclusion directly in the interface. If you see the LED light up red, that means inclusion wasn't completed and you'll need to try it again.
*If you’re using an S2 hub, it will ask you to enter the DSK key or scan the QR code printed on the back to complete SmartStart inclusion.
Once the switch has been added to your hub, you'll be able to create rules for it, control it remotely, and customize it via the advanced settings.
Zooz products are now officially integrated with the new ZWaveJS integration of Home Assistant. If you're experiencing issues with accessing the advanced settings of your ZEN34 we would recommend first updating to the JS integration then excluding and re-including your device to your network in order for it to be recognized correctly.
If you are having issues adding the switch to your network, the first thing to try is exclusion which is a type of Z-Wave reset.
Please don’t hesitate to contact us if you need help pairing your Remote Switch to Home Assistant, or if you have any other questions!
