This is product is discontinued and replaced with ZEN72.
Check which integration of Home Assistant you're using before following the appropriate instructions for accessing your ZEN22's advanced settings.
Zooz products are now officially integrated with the new ZWaveJS integration of Home Assistant. If you're experiencing issues with accessing the advanced settings of your ZEN22 we would recommend first updating to the JS integration then excluding and re-including your device to your network in order for it to be recognized correctly.
For earlier integrations:
If your ZEN22 dimmer uses firmware version 1.07 or earlier, then you should have access to the advanced settings immediately upon inclusion; no extra configuration should be needed. However, if your ZEN22 uses firmware version 3.0 or later, you'll need to add a new XML file. This is because Home Assistant doesn't have a way of distinguishing a device by firmware version; all other device identifiers are the same. So the first thing to check is the firmware version of your switch.
If your switch uses firmware version 3.0, you can access the advanced parameters by loading the XML file for the device using the instructions and code in the Home Assistant Device Specific database. Remember to stop the Z-Wave network when updating the file, and be sure to exclude the dimmer from the network before loading the XML file. Whether your dimmer is using firmware version 3.0 or later, the XML file should be good for any of these firmware versions.
Alternatively, you can use the Call Service command shown in the screenshot below to manually adjust selected parameters. You'll need to manually input the node_id of the dimmer, then enter parameter number, desired value, and size (it's usually 1 but can also be 2 or 4 [byte dec] so please check in the manual that comes with your device).
If you have any questions or issues during the process, please let us know! Our team will be happy to help.
