You can change the settings of your ZEN76 Switch to fit your smart home's needs!
Zooz products are now officially integrated with the new ZWaveJS integration of Home Assistant. If you're experiencing issues with accessing the advanced settings of your ZEN76 Switch we would recommend first updating to the JS integration then excluding and re-including your device to your network in order for it to be recognized correctly.
All of the ZEN76's settings should be available to adjust once the switch is paired to Home Assistant. If you're not seeing some of the settings, you can use the method below to make adjustments to your S2 Switch's settings.
You can now change any parameter manually on the JS Z-Wave integration for Home Assistant.
It needs to be done in Z-Wave JS UI and it’s not possible to do this within HA directly at the moment:
- Under node, scroll down below any exposed settings for the device (under Configuration) to the Custom Configuration section as shown in the screenshot here, where you'll see Value, Parameter and Size.
- You can enter the data according to the product documentation and click SET for the parameter to be updated.
- If you have a battery-powered device, you'll need to wake it up by performing the same activation sequence as during inclusion.
The ZEN72 S2 Switch supports OTA updates, so if you're on an older firmware version and would like access to the latest advanced setting options we recommend updating your switch.
Let us know if you have any other questions about your ZEN76 Switch! We'll be happy to help.
