This is product is discontinued and does not have a replacement yet. New product in development. What does that mean?

Once you've wired up your RGBW Dimmer and confirmed that the unit is powered, it's time to add it to your Home Assistant network:

Zooz products are now officially integrated with the new ZWaveJS integration of Home Assistant. If you're experiencing issues with accessing the advanced settings of your ZEN31 we would recommend first updating to the JS integration, then excluding and re-including your RGBW Dimmer to your network in order for it to be recognized correctly.

1. In Home Assistant: open Configuration > Integrations > Z-Wave JS > Configure.
2. Click on Add node.
3. Click on Start Inclusion to initiate pairing.
4. Click the Z-Wave button on the unit 3 times quickly (LED indicator will start flashing)
5. The LED will blink yellow to indicate communication with the hub. It will blink green or magenta once the device is successfully included to your network. It will blink red if inclusion is not successful.
6. Home Assistant will confirm that the device was added, and it will be immediately visible in your device list. 

If you are having issues adding the RGBW Dimmer to your network, the first thing to try is exclusion which is a type of soft Z-Wave reset. 

Please don’t hesitate to contact us if you need help pairing your device to Home Assistant, or if you have any other questions!