Adding the ZEN34 Remote to your Z-Wave system is easy! Just make sure you've removed the pull-tabs from the battery slots to power the device up first. 

Once powered, you can go ahead and use these steps to have your ZEN34 paired in no time:

1. Make sure the device is within range of your Z-Wave network
2. Put your Z-Wave hub in inclusion/pairing mode
3. Tap the upper paddle of the Remote Switch 6 times quickly to finalize the inclusion process
4. A new remote control / button controller device will appear on your hub's device list

*If you’re using an S2 hub, it will ask you to enter the DSK key or scan the QR code printed on the back to complete SmartStart inclusion.

If you're having trouble adding the device to your controller, you may need to exclude it first. Check out these instructions for how to do that.

Reach out to us if you have any other questions about your ZEN34, we'll be happy to help!