You can customize the ZEN74 however you'd like via the advanced settings!
Zooz products are now officially integrated with the new ZWaveJS integration of Home Assistant. If you're experiencing issues with accessing the advanced settings of your ZEN74 Toggle Dimmer we would recommend first updating to the JS integration then excluding and re-including your device to your network in order for it to be recognized correctly.
All of the ZEN74's settings should show up once the dimmer pairs to your network. If you're not seeing certain settings, you can use an alternative method to change your Toggle Dimmer's settings.
You can now change any parameter manually on the JS Z-Wave integration for Home Assistant.
It needs to be done in Z-Wave JS UI and it’s not possible to do this within HA directly at the moment:
- Under node, scroll down below any exposed settings for the device (under Configuration) to the Custom Configuration section as shown in the screenshot here, where you'll see Value, Parameter and Size.
- You can enter the data according to the product documentation and click SET for the parameter to be updated.
- If you have a battery-powered device, you'll need to wake it up by performing the same activation sequence as during inclusion.
The ZEN74 Toggle Dimmer supports OTA updates, so if you're on an older firmware version and would like access to the latest advanced setting options we recommend updating your switch.
Contact us here if you have any other questions about your ZEN74! We'll be happy to help.
