ZSE41 Open | Close XS Sensor & Compatible Hubs
The ZSE41 Open |Close XS Sensor is compatible with the following Z-Wave systems: * Z-Box Hub (recommended for all Zooz products) * Ezlo Plus * Ezlo Secure * Home Assistant (Z-Wave JS) * HomeSeer (Z-Wave Plus or Z-Wave JS Front End) * Homey * Hubitat (2.2.9 or higher) * Ring Alarm * SmartThings (custom lua…
ZSE41 Open | Close XS Sensor Specs
Here are the technical details and specs for the ZSE41 Open | Close XS Sensor: * Z-Wave Region: US, CA, MX / EU, UK / AU, NZ * Z-Wave Chip: 700 series (ZSE41) / 800 series (ZSE41 800LR) * Power: 1 CR2032 battery (included). Energizer, Panasonic, or Maxell recommended. Do NOT use Duracell batteries due to t…
How Do I Perform Hard Reset on My ZSE41 Open | Close XS Sensor?
Try factory resetting your ZSE41 sensor in case it's experiencing any configuration issues. If you've already tried excluding the Open|Close Sensor from your network, and it is unresponsive to manual and Z-Wave control, then a factory reset is the next step. A hard reset will erase all custom settings and recorded a…
ZSE41 Open | Close XS Sensor Advanced Settings
Here is a full list of advanced settings (parameters) for the ZSE41 XS Open | Close Sensor: LED Indicator Parameter 1: Turn the LED indicator for open/close status change on or off. Values: 0 – LED indicator won’t blink when the sensor’s status is changed from open to close and vice versa; 1 – LED indicator wi…
ZSE41 Open | Close Sensor Change Log
Here is a list of the changes and updates we made to the ZSE41 Open | Close Sensor so far. VER. 1.10 Original release. Hardware: * 700 Series Z-Wave Chip * 1 CR2032 battery (included) Firmware: 1.10 * Adjustable settings for quick and reliable open/close reporting * SmartStart + S2 Authenticated Security su…
How to Add Your ZSE41 Open | Close XS Sensor to Home Assistant
Your ZSE41 can be added to Home Assistant in just a few easy steps! We recommend using the new JS Z-Wave integration for best results. Here are the instructions for pairing the ZSE41 to Home Assistant: * Power the sensor up. * In Home Assistant: open Configuration > Integrations > Z-Wave JS > Configure…
ZSE41 Open | Close XS Sensor FAQs
Frequently Asked Questions About the ZSE41 Open | Close XS Sensor Find the answers to your questions quickly by searching key words! * Press the CTRL and F keys at the same time on your keyboard. A little box should pop up in your browser window. * Type in a key word in your question like "hub" or "compatible". Y…
Zooz SmartThings Edge Drivers
SmartThings is slowly transitioning from the legacy groovy platform to the new lua platform . This creates new challenges for seamless integration as well as access to key and advanced features of our devices. As usual, we're committed to providing the best possible experience to all of our customers, regardless of …
