The ZSE44 Temperature | Humidity Sensor needs a strong Z-Wave network.
To power the sensor, you'll want to use the included single CR2450 battery.
If you've just replaced the battery in your sensor and find your unit is having issues, here are a few things you can try:
- Make sure the batteries are in the proper orientation
- It sounds obvious, but we've found that most troubleshooting is resolved just by checking the batteries!
- Try excluding it and pairing it again
- Bring the sensor closer to the hub during the process to eliminate any range issues and run a Z-Wave repair (if your hub supports that function) once it's fully configured and installed in its target location.
Connectivity Issues? The best Z-Wave mesh networks have a good amount of signal repeating devices installed around the home. This helps your Z-Wave hub stay connected with each and every device, especially if they're installed far away from the hub. The ZSE44 sensor has a Z-Wave range of up to 300 feet line of sight, but obstacles like thick walls, large furniture, and glass or metal elements can limit the Z-Wave signal. We recommend adding a Z-Wave signal repeater between your hub and the ZSE44 if its installation location is far from the hub.
Signal repeaters include any non-battery powered Z-Wave devices installed in locations where there aren't a lot of other signal repeating Z-Wave devices so that the hub can form reliable communication routes to all the devices in your network. The repeater can be any smart plug or switch, like the ZEN25 Double Plug or ZEN15 Power Switch, or a dedicated Z-Wave signal repeater, like this one here.
Repeaters may not be needed if you've got an extensive network of Z-Wave devices. But if your ZSE44 is having issues staying connected to your hub, then you may need to try a different location within the hub's range, adding a repeater, or relocating an existing one in your house to help with any range or communication issues. If your ZSE44 is within range and in an area with other signal extenders, and still having problems, then these other hub-specific troubleshoots could be worth trying.
Still having trouble with your ZSE44? Send us a message and we'll be happy to help!
