Recommended Accessories for Your ZSE70 Outdoor Motion Sensor
The ZSE70 Outdoor Motion Sensor is a versatile device, allowing you to choose the best method to power the sensor; battery or 12-24V AC/Dc power. Battery Powered If you prefer the sensor to be powered by batteries, the sensor comes equipped with 2 CR123A batteries. Make sure to insert the batteries in the proper or…
Recommended Accessories for Your ZEN37 Wall Remote
Check out our ZEN37 Wall Remote accessory recommendations below: The ZEN37 is the perfect add-on switch to put in an existing switch box or install on any flat surface, no wiring required! If you're installing the Wall Remote on a flat surface where there isn't an existing switch box, you could add a Screwless Deco…
Recommended Accessories for Your ZEN53 DC Motor Controller
Get the right accessories to make sure your ZEN53 works well in your installation! The ZEN53 is great to: * Control DC motors and make your blinds, shades, and awnings smart * Create schedules for morning and evening routines * Automate your shades and awnings based on data from smart sensors, including brigh…
Recommended Accessories for Your ZAC38 Range Extender
Your ZAC38 Range Extender is ready to install out of the box. The unit is designed to boost your Z-Wave network. With the NEW 800 series chip, it helps provide faster communication and more range to support your existing Z-Wave mesh. With a back-up battery, the device can provide power outage notifications to you…
Recommended Accessories for Your ZEN05 Outdoor Smart Plug
Your ZEN05 is ready to install, indoors or out! The weather-resistant housing with a protective outlet cover safeguards the outlet from dirt and debris when not in use. The ZEN05 is IP65 rated, which means it is fully dust proof and water resistant. The ZEN05 is rated for outdoor use, but some users also successf…
Recommended Accessories for Your ZEN55 DC Signal Sensor
Ensure your new ZEN55 DC Signal Sensor works well in your installation! * Use with any standard interconnect smoke and/or CO alarms. * Always turn off the power at the breaker before handling the wiring, this is a 120 V high-voltage installation. * The last detector in series will be the one that only has 3 w…
Recommended Accessories for Your ZEN14 Outdoor Double Plug
Install your ZEN14, indoors or out! The protective outlet cover and the weather-resistant housing safeguards the outlet from dirt and debris when not in use. The ZEN14 is IP65 rated, which means it is fully dust proof and water resistant. The ZEN14 is rated for outdoor use, but some users also successfully use a …
Recommended Accessories for your ZEN54 0-10V Dimmer
Get the right accessories to make sure your ZEN54 0-10V Dimmer works well in your installation! The ZEN54 has: * Dimming Z-Wave control for 0-10 V LED drivers only (do NOT user with 120 V LED bulbs) * Use with LED panels and fixtures with 0-10 V dimming drivers up to 4 A * 700 series Z-Wave chip: more range,…
Recommended Accessories for Your ZSE44 Temperature | Humidity Sensor
The ZSE44 Temperature | Humidity Sensor needs a strong Z-Wave network. To power the sensor, you'll want to use the included single CR2450 battery. If you've just replaced the battery in your sensor and find your unit is having issues, here are a few things you can try: * Make sure the batteries are in the proper…
Recommended Accessories for Your ZSE41 Open | Close Sensor
There are many applications for the ZSE41 Open | Close Sensor! When connected to your Z-Wave hub, it will tell you exactly if and when a door or window has been opened. Attach it to a kitchen cabinet to make sure it's not accessed when it's not supposed to be. Put it on a drawer to safeguard your valuables. Receive…
