Once you've got your ZEN71 installed and working manually, it's time to add it to your Home Assistant network!
You can use these steps to include the ZEN71 On/Off Switch to Home Assistant:
- In Home Assistant: open Configuration > Integrations > Z-Wave JS > Configure.
- Click on Add node.
- Click on Start Inclusion to initiate pairing.
- Tap the UPPER paddle 3 times as quickly as possible (LED indicator will start flashing)
- Home Assistant will confirm that the switch was added, and it will be immediately visible in your device list.
Once the hub confirms a successful pairing, you'll be able to customize the advanced settings, create scenes, and control the switch via Z-Wave!
* If you’re using an S2 hub, it will ask you to enter the DSK PIN or scan the QR code printed on the metal faceplate of the switch to complete SmartStart inclusion.
Zooz products are now officially integrated with the new ZWaveJS integration of Home Assistant. If you're experiencing issues with accessing the advanced settings of your ZEN71 we would recommend first updating to the JS integration then excluding and re-including your device to your network in order for it to be recognized correctly.
If your switch won't pair to Home Assistant, you'll need to try excluding it first. The process can be done even if the switch was never included and acts as a type of Z-Wave reset.
Feel free to send us a message if you need help troubleshooting the device!
