Once you've successfully installed your ZEN73 Toggle Switch, and confirmed it works manually, it's time to include it to your smart home network!
Using the steps below, you'll have the ZEN73 paired with Home Assistant in no time:
- In Home Assistant: open Configuration > Integrations > Z-Wave JS > Configure.
- Click on Add node.
- Click on Start Inclusion to initiate pairing.
- Toggle the switch UP 3 times very quickly (LED indicator will start flashing)
- Home Assistant will confirm that the switch was added, and it will be immediately visible in your device list.
Once the switch has been added to your hub, you'll be able to create rules for it, control it remotely, and customize it via the advanced settings.
* If you’re using an S2 hub, it will ask you to enter the DSK PIN or scan the QR code printed on the metal faceplate of the switch to complete SmartStart inclusion.
Zooz products are now officially integrated with the new ZWaveJS integration of Home Assistant. If you're experiencing issues with accessing the advanced settings of your ZEN73 we would recommend first updating to the JS integration then excluding and re-including your device to your network in order for it to be recognized correctly.
Trouble pairing the 700 series toggle switch? The first thing to try is exclusion, which is a type of Z-Wave reset and can be done even if the switch hasn't been paired before.
Don’t hesitate to reach out to us if you need help adding your ZEN73 to Home Assistant!
