ZEN77 Dimmer installed and working 100% manually? Let's add it to Home Assistant!
Here are the steps for including the device to your network:
- In Home Assistant: open Configuration > Integrations > Z-Wave JS > Configure.
- Click on Add node.
- Click on Start Inclusion to initiate pairing.
- Tap the UPPER paddle 3 times as quickly as possible (LED indicator will start flashing)
- Home Assistant will confirm that the dimmer was added, and it will be immediately visible in your device list.
Once the ZEN77 dimmer is paired with your hub, you'll be able to customize it via the advanced settings, create rules for it, and control it remotely.
* If you’re using an S2 hub, it will ask you to enter the DSK PIN or scan the QR code printed on the metal faceplate of the switch to complete SmartStart inclusion.
Zooz products are now officially integrated with the new ZWaveJS integration of Home Assistant. If you're experiencing issues with accessing the advanced settings of your ZEN27 we would recommend first updating to the JS integration then excluding and re-including your device to your network in order for it to be recognized correctly.
If your ZEN77 is having trouble being paired to Home Assistant, then you need to try excluding it. The process can be done even if the dimmer hasn't been paired to a Z-Wave network before, and can help it be included.
Send us a message if you need help pairing your ZEN77 to Home Assistant, or if you have any other questions!
