Add your Outdoor Plug to SmartThings in a few easy steps. You'll be able to control the device connected to your plug from the app, create on/off schedules for it and use it in more complex automations. If you have your smart speaker connected to SmartThings, you'll also be able to control the plug with voice commands.

We recommend installing the custom lua Edge driver for your plug so you can take advanced of the advanced settings of the device as well. Click here for detailed installation instructions.

It's best to add your plug from the target location to establish the best route from the hub on day one.

Here's how to add your Outdoor Plug to SmartThings: 

1. Tap the plus icon in the home screen
2. Tap Add device
3. Tap "Scan QR code"
4. Scan the QR code on the label printed on your Outdoor Plug device
5. Plug the Outdoor Plug into a receptacle and follow the prompts on the screen to complete the set-up (if prompted to activate the device, please click the Z-Wave button on the plug 3 times quickly)
6. The app will indicate when the device connects
7. Tap Edit to rename the device, and tap Done to save the name
8. Tap Done to complete the setup

Having issues including the plug to SmartThings? You may need to reset it. The best way to approach this is through a Z-Wave exclusion from the SmartThings app (it works even if the plug has never been added to SmartThings before):

1. Tap on your hub in the home page of the app or on the device list
2. Tap the three dots in the top right
3. Tap Settings
4. Tap Z-Wave Utilities 
5. Tap Z-Wave Exclusion
6. While the app is searching for a device, press the Z-Wave button on the device 3 times as quickly as possible
7. The app will indicate when the device is successfully removed. Tap Done

Now you can try adding the plug again.

If you still have any questions or run into a different issue, please get in touch here. We'll be happy to help!