Inclusion is another name for adding or pairing a device to your Z-Wave system. 

If your ZEN05 works 100% manually, then follow the steps below to include the plug to your Z-Wave hub.

 Here are the steps to add the device to your system: 

1. Plug the Outdoor Smart Plug into the grounded 120VAC receptacle you plan to use it with
2. Put your Z-Wave hub into inclusion mode (see your controller's device manual, as each brand is different)
3. Press and release the Z-Wave button 3 TIMES QUICKLY
4. The LED indicator will start flashing blue to confirm inclusion mode and turn green for 1 second once inclusion is completed.

Once the plug is paired, you'll be able to create rules for it, control it remotely, and customize it via the advanced settings (once integrated).

* If you’re using an S2 hub, it will ask you to enter the DSK PIN or scan the QR code printed on the plug.

If your ZEN05 is having trouble connecting to your Z-Wave network, the first thing to try is exclusion, which is a type of Z-Wave reset. 

Send us message if you have any questions or are having any issues with your Outdoor Smart Plug.