The advanced settings provide the ability to adjust and fully customize your ZEN55 DC Signal Sensor!
The ZEN55 Sensor is fully integrated with the latest JS integration of Home Assistant, so you should have access to all of its advanced settings as long as you're running version 0.1.81 or higher. If you aren't on the JS integration yet, Home Assistant currently recommends handling Z-Wave devices through the new Z-Wave JS integration since all others have essentially been abandoned and / or discontinued.
All of the advanced settings for the ZEN55 DC Signal Sensor should be available, however, if you are unable to view a certain setting, there is another way to make adjustments to your sensor's settings.
You can now change any parameter manually on the JS Z-Wave integration for Home Assistant.
In the Z-Wave JS UI panel:
- Under node, scroll down below any exposed settings for the device (under Configuration) to the Custom Configuration section as shown in the screenshot here, where you'll see Value, Parameter and Size.
- You can enter the data according to the product documentation and click SET for the parameter to be updated.
Let us know if you need any assistance! We're happy to help!
