This is product is discontinued and replaced with ZSE11.
Incomplete configuration during inclusion? Pending changes? You may need to wake your sensor manually!
You may need to wake the sensor up manually if it doesn’t fully configure during set-up (values are not displayed or errors pop up in your hub’s interface) or if you change advanced settings for the sensor and want them to update immediately instead of waiting for the scheduled wake-up time.
The sensor’s wake-up interval is set to 12 hours by default to save battery life. You can change the wake-up interval using your controller’s advanced settings if available. During wake-up, the sensor receives communication from the hub (setting updates or network information). A long wake-up interval will not affect how often the sensor reports motion and other values to your gateway controller.
To manually wake-up your ZSE40 4-in-1 Sensor:
- Press and release the Z-Wave button once.
- The LED indicator will flash once (blue or orange).
Please don't hesitate to reach out to us with any questions!
