This is product is discontinued and replaced with the ZEN74. What does that mean?

After checking that your dimmer is working well manually, let's include it to your Z-Wave system: 

We call it "inclusion" but there are many words for it depending on the system you're using. Inclusion is just the process of adding or pairing a device to your Z-Wave system. Here's how to include your ZEN24 Dimmer to your Z-Wave system:

1. Put your Z-Wave hub into inclusion mode (see your hub's manual for specific inclusion steps)
2. Toggle the switch UP 3 times quickly to finalize the inclusion process
3. A new on/off device will appear on your controller's device list

If you try including the dimmer and don't see it appear on your device list, try this. 

If you have any questions about the process, don't hesitate to reach out. We're always here to help.