Adding the ZEN37 Wall Remote to your Z-Wave system is easy! Use the triangle tool to open the remote and access the battery. Pull the battery tab to power the Wall Remote. If using SmartStart, it will join your hub automatically. Otherwise, proceed to manual inclusion.

To manually include the ZEN37:

1. Make sure the device is within range of your Z-Wave network
2. Put your Z-Wave hub in inclusion/pairing mode

3. Tap the top button of the Remote Switch 6 times quickly to finalize the inclusion process

4. A new remote control / button controller device will appear on your hub's device list

*If you’re using an S2 hub, it will ask you to enter the DSK key or scan the QR code printed on the back to complete SmartStart inclusion.

If you're having trouble adding the device to your controller, you may need to exclude it first. Check out these instructions for how to do that.

Reach out to us if you have any other questions about your ZEN37, we'll be happy to help!