Configuration is simple with the Z-Box! The ZEN52 Double Relay will be recognized and configured correctly out of the box. Simply follow the steps below to access and customize the advanced settings.

To access and configure any advanced settings, you need to be logged in locally to your Z-Box hub and connected to the same Wi-Fi network on your device / computer as the Z-Box Hub. The ability to adjust advanced settings for Z-Wave devices is available only in the WEB UI at this time.

1. Click on Settings (gear icon) in the sidebar navigation menu on your Z-Box web interface.

2. A new screen showing all of your devices will appear.

3. Click the arrow on the right side of the ZEN52 Double Relay. Always use the main device (and not the child devices) to modify settings.

4. Click on the Parameters tab in the settings view.

5. You'll see the settings for the device listed - simply click the arrow next to the setting you want to modify to make any changes. 

6. Click Save.

Please let us know if you have any questions!