ZEN37 Wall Remote Change Log
Here is a list of the changes and updates we made to the ZEN37 Wall Remote so far.
VER. 1.0 (released 12/2023)
Original release.
Hardware V1
- Standard paddle switch size & magnetic base
- Powered by 1 x LIR2032 rechargeable battery
- Adjustable LED indicator (4 colors and 3 brightness levels)
- The latest 800 chip with S2 and SmartStart support
- Rechargeable battery & USB charging port
Firmware: 1.0
-
Central scene command class or direct association (Group 1 with 1 Controller node for Lifeline communication, Group 2 and 3 with up to 10 devices for on/off control through basic set commands (single click for each button), Group 4 and 5 for dimming control through switch multilevel commands (press-and-hold buttons), and Group 6, 7, 8, and 9 for toggle control of associated devices.
-
SmartStart and S2 Authenticated Security
-
OTA firmware updates
VER. 2.0 (released 10/2024)
Hardware V2
- Updated the re-chargeable coin battery LIR2023 (40mAh) to the re-chargeable Lithium battery pack (200mAh)
- The re-chargeable Lithium battery pack is soldered to the PCB, so there is no need to open the case and remove the pull-out tab like in ZEN37 hardware version 1.0
- Added the black version of the ZEN37 for the US and EU frequency
Firmware 2.0
- Based on firmware 1.0
