Customize your LED indicator colors and behavior, or set the dimming duration for associated devices and more with the advanced settings options available for your ZEN37 Wall Remote!

Zooz products are officially integrated with the Z-Wave Plus and the Z-Wave JS Front-End of HomeSeer, which greatly simplifies device management and customization. If you encounter any issues while trying to access the advanced settings of your ZEN37, we recommend updating to the Z-Wave Plus and the Z-Wave JS Front-End integration, then excluding and re-including your device to your network in order for it to be recognized correctly.

If you're not using the Z-Wave Plus or the Z-Wave JS Front-End of HomeSeer, the settings are accessible via a direct input command, by inputting the parameter number, size,  and the desired value, all of which can be found in the Advanced Settings article for your device. Once entered, you'll need to send the send change command. See HomeSeer documentation for specific instructions on how to change parameters if you are not running Z-Wave Plus or the Z-Wave JS Front-End of HomeSeer.

To change a parameter via the Z-Wave JS Front-End in HomeSeer, first go to the device column and click on it to open the device page.

1. Scroll to see "configuration" and click the drop-down arrow on the left to open the settings menu/drop-down:

2. Find the setting you want to change. You can either click on the drop-down arrow if the setting has specific options, or enter a valid number value based on the available settings:

3. Click on the sideways arrow next to the setting to send the command for the updated parameter value to change:

4. If successfully changed, a small green message will appear in the top right saying Value Updated:

Please don't hesitate to reach out to our team if you have any questions!