The ZEN32 Scene Controller is now integrated with Alarm.com, and can be used to program scene activation. While you are not able to directly trigger another device with the ZEN32 at this time or access the advanced settings, you can trigger any scene with the 4 small scene control buttons. Directly control the connected load with the main button, and use the multi-tap functionality for additional scene activation.

Please note: In Rules Builder you can only control/trigger another scene; you are not able to control another device directly. Please ensure you have created the scene you want to trigger with the ZEN32 before programming the scene buttons.

Check out the steps below to start programming your ZEN32 on Alarm.com:

1. From the Home page, choose More. 2. Click Manage Devices. 3. In the Remotes section, click the 3 dots for the ZEN32 Scene Controller and then click Device Settings:

4. You are now on the ZEN32 settings page. Scroll to the Automation section. 5. Click Configure under the desired button: 6. You are now in the Rules Builder section. Click Select under Then:

7. Click Scene. NOTE: In Rules Builder you can only control another scene; you are not able to control another device directly, so please ensure you have created the scene you want to trigger with the ZEN32 first. 8. Choose the desired scene you want to trigger with the button and click Done if you only wish to use the single click. If you wish to use the  multi-tap, continue to the last step. 9. OPTIONAL: Using the pen icon, you can edit to select the multi-tap options. If you prefer to use only the single-click, do not click edit.

9. Choose your preferred button action and click Done. 10. Click Save and choose a name for your new rule. Hit OK and this will exit the wizard:

Please don't hesitate to reach out with any questions you may have!