Check out all the options available to customize the ZEN75 to your smart home needs!
Zooz products are officially integrated with the ZWaveJS integration of Home Assistant. If you're experiencing issues with accessing the advanced settings of your ZEN75 Heavy Duty Switch we would recommend first updating to the JS integration then excluding and re-including your device to your network in order for it to be recognized correctly.
All About Advanced Settings
The terminology for advanced settings varies depending on your Z-Wave hub; Home Assistant uses the official term “Parameters.” Despite these differences in naming, the purpose remains the same: configuring consistent behavior for your device. We provide the full list of settings available for each device in our Knowledge Base.
Each advanced setting consists of four key parts:
-
Label: If your device is properly integrated with your hub, this will display as the setting's name. Hubs like SmartThings show only the label and description.
-
Parameter Number & Description: Most hubs, such as Hubitat and Home Assistant, list the parameter number along with the label and description.
-
Values: These are the selectable options for each setting. Some are simple (e.g., Enable/Disable), while others use numerical values.
-
Size: This is required in some systems when manually changing advanced settings (e.g., Home Assistant) or in hubs that do not provide direct access to settings.
Manual Parameter Changes
All of the ZEN75's settings should be available once the switch is paired to your network. If a certain setting isn't showing up for you, you can use a different method to change your Dimmer's settings.
You can now change any parameter manually on the JS Z-Wave integration for Home Assistant.
It needs to be done in Z-Wave JS UI:
- Under node, scroll down below any exposed settings for the device (under Configuration) to the Custom Configuration section as shown in the screenshot here, where you'll see Value, Parameter and Size.
- You can enter the data according to the product documentation and click SET for the parameter to be updated.
The ZEN75 Heavy Duty Switch supports OTA updates, so if you're on an older firmware version and would like access to the latest advanced setting options, we recommend updating your switch.
Reach out to us if you have any questions! We'll be happy to help.