Want to access all of the advanced settings for your ZEN75 Heavy Duty Switch? Until the custom driver is ready, you can use the Universal Switch Driver if there are any settings missing or to enable the multi-tap programming functionality
Follow the simple instructions below to install the universal driver for your ZEN75:
-
Open Hubitat in your browser.
-
Click on Drivers Code in the side menu.
-
In the top right corner, click on "+New Driver" and paste the code from the following link. Please click on this link to access the code for the driver, then copy ALL of the code from the page.
-
Click Save in the top right corner.
-
You'll see a "Universal Z-Wave Switch" driver in your Drivers Code list now.
-
Now add your device to Hubitat or if you already have, assign the driver to it by going to the device view and selecting the driver name from the drop-down menu under Device Type. Then click Update Device.
-
Don't skip this step: Click the Configure button, then Save, and reload the device view or refresh page for all of the new settings to appear.
If you prefer not to use the custom driver, you can try out this Z-Wave Universal Device Scanner to access any parameters that may not be available yet in the custom driver. Please note that use of this driver is intended for expert users; use at your own risk: https://community.hubitat.com/t/release-z-wave-universal-device-scanner/97912
Reach out to us if you have any questions!
