The Zooz ZSE70 Outdoor Motion Sensor is a powerful tool for enhancing home automation and security. However, before you can start using it, you’ll need to activate the batteries if you plan on powering the sensors via battery. This guide will walk you through the step-by-step process of accessing and activating the batteries, helping you get your device up and running quickly. Whether you’re setting up the sensor for the first time or replacing old batteries, this article will provide clear and simple instructions to make the process hassle-free. Let’s dive in!

1. You'll want to start by opening the battery cover.
   • Turn the cover counterclockwise
   • You may need to apply some force to move the cover; however, please ensure you do not pull the cover, only twist.
   • No tools should be used during the process
2. Once the cover is open, please decide if you are going to include the device via Smart Start. If you are, please initiate the Smart Start process on your hub before going to step 3.
3. Remove the clear tabs from each battery slot.
4. If you are using the manual inclusion process, you can now initiate inclusion and click the Z-Wave button 3 times for manual inclusion.
5. Once the sensor is included, twist the cover clockwise to close. There will be a small, visible gap; don't worry, that's just the weatherproof seal!

We've included a helpful video for you below that details each step:

Questions? Let us know!