Some ZEN58 Low Voltage XS Relay configuration issues can be resolved by a factory reset.

When to perform a factory reset:

1. You have tried to exclude the relay from your network, or
2. It is unresponsive to manual and Z-Wave control

A hard reset will erase all custom settings and recorded activity, returning the device to factory defaults.

Steps to factory reset the ZEN58:

1. Ensure the relay is powered on
2. Click the Z-Wave button once and immediately after, press and hold the button for 15 seconds. The LED indicator will flash during the process and turn red for 3 seconds to confirm successful reset. NOTE: All previously recorded activity and custom settings will be erased from the device’s memory

After resetting the unit, try including it to your Z-Wave hub again to see if that helped resolve any issues you were seeing. 

If your ZEN58 is having trouble being reset, or if you're still experiencing issues after the reset, please reach out to our support.