You are using an unsupported browser. Please update your browser to the latest version on or before July 31, 2020.
close
You are viewing the article in preview mode. It is not live at the moment.
Looking for Z-Box Hub Support? Please click here to access the Z-Box Hub Support Portal.
Home > Plugs > ZEN15 Power Switch > ZEN15 & Your Z-Wave System > How to Add Your ZEN15 Power Switch to Your Z-Wave System
How to Add Your ZEN15 Power Switch to Your Z-Wave System
print icon

You can pair your ZEN15Power Switch with your Z-Wave hub via Auto Inclusion, Manual Inclusion, or Secure Inclusion. 

Your hub's manual may use a different term for it, but inclusion is just another word for pairing or adding a device to your Z-Wave system. Auto and Manual Inclusions apply for all Z-Wave hubs, but Secure Inclusion is only available for hubs that are security-enabled with AES encryption (if you're unsure if your hub supports AES, feel free to ask). Here are the three inclusion methods for the ZEN15 Power Switch:

Auto Z-Wave Inclusion

1. Put your Z-Wave hub into inclusion mode (see your hub's device manual, as each brand is different)
2. Plug the ZEN15 Power Switch into a grounded receptacle located within direct range of your Z-Wave hub
3. The LED indicator will start flashing blue, then turn blue (on) or pink (off) once included
4. A new on / off device should be recognized by your Z-Wave hub

Manual Z-Wave Inclusion

1. Plug the ZEN15 Power Switch into a grounded receptacle located within 3 feet from your Z-Wave gateway controller
2. Put your Z-Wave hub into inclusion mode (see your controller's device manual, as each brand is different)
3. Press and release the Z-Wave button 3 TIMES QUICKLY
4. The LED indicator will start flashing blue, then turn blue (on) or pink (off) once included
5. A new on / off device should be recognized by your Z-Wave hub

Secure Z-Wave Inclusion

1. Plug the ZEN15 Power Switch into a grounded receptacle located within direct range your Z-Wave hub
2. Put your Z-Wave hub into secure inclusion mode (see your hub's device manual, as each brand is different)
3. Press and HOLD the Z-Wave button for at least 3 seconds
4. The LED indicator will start flashing green, then turn blue (on) or pink (off) once included
5. A new secure on / off device will be recognized by your Z-Wave hub

 

* If you’re using an S2 hub, it will ask you to enter the DSK PIN or scan the QR code printed on the plug.

 

If you've tried the steps above and find that inclusion isn't working for you, here's what to try.

Have any questions about the inclusion process? Please let us know! We're always here to help.

Feedback
1 out of 7 found this helpful

Have you tried our virtual assistant chatbot? This AI tool can help you find answers from thousands of articles in our Knowledge Base quickly. Find it in the bottom righthand corner of the page.

Need more help? Our friendly team is ready to help you with any questions or concerns you may have about Zooz devices. Click here to submit a support ticket.

Are your devices registered? Extended warranty and firmware access is available for registered Zooz customers. Click here to submit your registration form.

Find the latest Zooz devices and great Z-Wave deals at The Smartest House.
 
scroll to top icon