Will the ZEN30 Double Switch work with my hub?

The Double Switch works great with the following Z-Wave systems:

• Z-Box Hub (recommended for all Zooz products)
• Home Assistant
• HomeSeer (Z-Wave Plus or Z-Wave JS Front-End)
• Hubitat (2.1.8 release or higher)
• ISY
• openHAB (2.5.1 or higher)
• SmartThings
• Wink and Wink 2 (no advanced settings, add as Generic Z-Wave Switch)

The Double Switch will also be recognized by any open systems which support dimmer (multilevel switch) device types. If your hub is not listed above, please get in touch with us before buying the device to avoid the hassle of returns.

Will the device work with my alarm panel?

It will be recognized as a single switch. You will not be able to separate control for the dimmer and the relay, it will be displayed as a single dimmer.

Most alarm panels, like Alarm.com, generally support single switches, door locks, select thermostats, and other approved devices on their compatibility list. We recommend reaching out to your alarm panel provider to confirm compatibility and check for any upcoming device integrations.

Since the device follows the Z-Wave protocol and is Z-Wave certified, integration is dependent on your alarm panel provider. Unfortunately, while we can request integration, we don’t have control over whether the device is fully recognized—this would need to be supported by your alarm panel provider.

For more details on alarm panel compatibility, click here.

Can I connect the device directly to my Amazon Alexa, Google Home, or other smart speaker?

No. Smart speakers like Alexa or Google are not equipped with a Z-Wave chip and are not Z-Wave gateway controllers. Without a compatible Z-Wave hub, no Z-Wave products will not function correctly with Alexa or Google alone.

However, if your Z-Wave hub supports a Smart speaker integration (like Z-Box, SmartThings, and Hubitat do), this would allow voice control of your Z-Wave devices from your smart speakers.

Still confused? Get in touch!