ZSE70 Outdoor Motion Sensor & Compatible Hubs
Will the ZSE70 Outdoor Motion Sensor work with my hub? The Outdoor Motion Sensor works great with the following Z-Wave systems: * Z-Box Hub (recommended for all Zooz products) * Home Assistant * HomeSeer (Z-Wave Plus or Z-Wave JS Front End) * Hubitat (with custom driver ) * SmartThings Hub (with Edge driv…
ZEN37 Wall Remote & Compatible Hubs
Will my Z-Wave hub work with the ZEN37 Wall Remote? The Remote Switch was verified as compatible with the following Z-Wave systems: * Z-Box Hub (recommended for all Zooz products) * Alarm.com (can trigger scenes, not individual devices) * Home Assistant (Z-Wave JS) * HomeSeer (Z-Wave Plus or Z-Wave JS Front En…
Why is My ZEN17 Universal Relay Not Recognized by Wink?
Unfortunately, Wink doesn't provide blanket compatibility for all multi-channel devices. The Universal Relay may show up as a single device in Wink and will only allow you to control all of the 3 relays at the same time. Individual control of the relays will not be possible through Wink's system. If you were plannin…
ZEN14 Outdoor Double Plug & Compatible Hubs
Which Z-Wave hubs will work with my ZEN14 Outdoor Double Plug? The Outdoor Double Plug is verified as compatible with the following Z-Wave systems: * Z-Box Hub (recommended for all Zooz products) * Ezlo Plus (select "Generic Z-Wave device" from the Device Wizard) * Ezlo Secure (select "Generic Z-Wave device…
Why is My ZSE11 Q Sensor Not Recognized by Wink?
Unfortunately, Wink doesn't recognize any type of multi-level sensors regardless of brand. Wink also doesn't support many of the newer Z-Wave Plus devices based on the updated command classes. You can find out more about the Q Sensor's compatibility here . We'd recommend using your ZSE11 sensor with SmartThings…
ZAC38 Range Extender & Compatible Hubs
Which Z-Wave hubs will work with my ZAC38 Range Extender? The Range Extender was verified as compatible with the following Z-Wave systems: * Z-Box Hub (recommended for all Zooz products) * Home Assistant (Z-Wave JS) * Hubitat (2.2.9 or higher): custom driver needed to access advanced settings * SmartThings: …
ZEN53 DC Motor Controller & Compatible Hubs
The ZEN53 DC Motor Controller is compatible with the following Z-Wave systems: * Z-Box Hub (recommended for Zooz products) * Home Assistant (Z-Wave JS) * HomeSeer (Z-Wave Plus or Z-Wave JS Front End) * Hubitat ( custom driver required ) * SmartThings ( Edge driver required ) Will the device work with my alarm…
ZEN05 Outdoor Smart Plug & Compatible Hubs
Which Z-Wave hubs will work with my ZEN05 Outdoor Smart Plug? The Outdoor Smart Plug is verified as compatible with the following Z-Wave systems: * Z-Box Hub (recommended for all Zooz products) * 2GIG (no advanced settings available) * ADT Pulse (no advanced settings available) * Ezlo Plus * Ezlo Secure * …
ZEN54 0-10V Dimmer & Compatible Hubs
The ZEN54 0-10V Dimmer is compatible with the following Z-Wave systems: * Z-Box Hub (recommended for Zooz products) * Ezlo Plus * Ezlo Secure * Fibaro Home Center Lite * Home Assistant (Z-Wave JS) * HomeSeer (Z-Wave Plus or Z-Wave JS Front End) * Hubitat ( custom driver needed) * SmartThings ( Edge driver…
ZEN55 Smoke & CO Detector Bridge & Compatible Hubs
The ZEN55 Smoke & CO Detector Bridge is compatible with the following Z-Wave systems: * Z-Box Hub (recommended for Zooz products) * Home Assistant (Z-Wave JS) * HomeSeer (Z-Wave Plus or Z-Wave JS Front End) * Hubitat ( custom driver required ) * SmartThings ( Edge driver needed ) Will the device work with my …
