-
Why is My ZEN17 Universal Relay Not Recognized by Wink?
Unfortunately, Wink doesn't provide blanket compatibility for all multi-channel devices. The Universal Relay may show up as a single device in Wink and will only allow you to control all of the 3 relays at the same time. Individual control of the relays will not be possible through Wink's system. If you were plannin…
-
Why is My ZEN16 MultiRelay Not Recognized by Wink?
Unfortunately, Wink doesn't provide blanket compatibility for all multi-channel devices. The MultiRelay shows up as a single device in Wink so it only allows you to control all of the 3 relays at the same time. Individual control of the relays is not possible through Wink's sytem. If you were planning on using the M…
-
Why is My ZSE11 Q Sensor Not Recognized by Wink?
Unfortunately, Wink doesn't recognize any type of multi-level sensors regardless of brand. Wink also doesn't support many of the newer Z-Wave Plus devices based on the updated command classes. You can find out more about the Q Sensor's compatibility here . We'd recommend using your ZSE11 sensor with SmartThings…
-
My ZEN30 Double Switch Shows Offline in Wink
Connectivity and range issues are common in the world of Z-Wave devices. Here are some things to try: Network Discovery should be the first thing.This is a feature in Wink's app that allows you to refresh the connections between hub and devices, and may help Wink find the most efficient route to your Double Switch:…
-
My ZEN24 Dimmer Shows Offline in Wink
This is product is discontinued and replaced with the ZEN74 . What does that mean? If you've added your dimmer and see the Offline error in your Wink app, here's what to try: Give Network Discovery a go . This is a feature in Wink's app that allows you to refresh the network, and may help Wink find the most ef…
-
Why is My ZSE18 Motion Sensor Not Recognized by Wink?
Unfortunately, Wink doesn't recognize many of the newer Z-Wave Plus devices based on updated command classes. It also doesn't support multi-level sensors, like the ZSE18, regardless of brand or Z-Wave version. If you're looking for a system that's more open and flexible, we'd recommend using looking into SmartThi…
-
Why is My ZEN31 RGBW Dimmer Not Recognized by Wink?
This is product is discontinued and does not have a replacement yet. New product in development. What does that mean? Unfortunately, Wink doesn't provide blanket compatibility for all multi-channel devices. Wink also doesn't support many of the newer Z-Wave Plus devices based on the updated command classes. Her…
-
Why is My ZSE19 Multisiren Not Recognized by Wink?
This is product is discontinued and has been replaced by the ZSE50 Siren & Chime : What does that mean? Documentation for the new ZSE50 Siren & Chime can be found here: ZSE50 Knowledge Base Unfortunately, Wink isn't the most open system out there. Wink doesn't recognize any type of multi-level sensors; the ZS…
-
How to Add Your ZEN30 Double Switch to Wink
Control your Double Switch's light dimmer and on/off relay separately or together in the Wink app, or add the device to custom Robots. While you're able to take advantage of the Double Switch's most important functionality, remote control and monitoring of the dimmer and on/off relay, Wink's interface currently does…
-
My ZEN06 Smart Plug Shows Offline in Wink
This is product is discontinued and replaced with ZEN04 . What does that mean? If you're getting the Offline error in your Wink app, this usually indicates a range or connectivity issue. If your ZEN06 Smart Plug shows Offline, first try Network Discovery . This is a feature in Wink's app that allows you to refre…
Looking for Z-Box Hub Support? Please click here to access the Z-Box Hub Support Portal.
