This is product is discontinued and replaced with ZEN73.
The ZEN23 should be recognized by Hubitat with all the advanced settings because it is officially integrated.
If you don’t see all the advanced settings in the device view then you’ll need to install a custom device driver. You should verify that your hub’s platform is on the most up-to-date version and that your ZEN23 has the latest firmware. You can then install the custom device driver for the switch to have access to all the advanced settings using the steps here:
-
Open Hubitat in your browser.
-
Click on Drivers Code in the side menu.
-
In the top right corner, click on "+New Driver" and paste the code from the following link. Please click on this link to access the code for the driver, then copy ALL of the code from the page.
-
Click Save in the top right corner.
-
You'll see a "Zooz ZEN On/Off Switches Universal" driver in your Drivers Code list now.
-
Now add your device to Hubitat or if you already have, assign the driver to it by going to the device view and selecting the driver name from the drop-down menu under Device Type. Then click Update Device.
-
Don't skip this step: Click the Configure button, then Save, and reload the device view or refresh page for all of the new settings to appear.
If you prefer not to use the custom driver, you can try out this Z-Wave Universal Device Scanner to access any parameters that may not be available yet in the custom driver. Please note that use of this driver is intended for expert users; use at your own risk: https://community.hubitat.com/t/release-z-wave-universal-device-scanner/97912
Let us know if you have any questions!
