This is product is discontinued and replaced with the ZEN74. What does that mean?
You should have access to the advanced settings from device view in Hubitat since the ZEN24 is officially integrated.
You can install a custom device driver for the switch if you don’t see all the settings available. Your hub needs to be operating on the latest version first and you should see if your ZEN24 has the most recent firmware update. You can then follow the step by step instructions for installing the custom device driver:
-
Open Hubitat in your browser.
-
Click on Drivers Code in the side menu.
-
In the top right corner, click on "+New Driver" and paste the code from the following link. Please click on this link to access the code for the driver, then copy ALL of the code from the page.
-
Click Save in the top right corner.
-
You'll see a "Zooz ZEN Dimmer Advanced" driver in your Drivers Code list now.
-
Now add your device to Hubitat or if you already have, assign the driver to it by going to the device view and selecting the driver name from the drop-down menu under Device Type. Then click Update Device.
-
Don't skip this step: Click the Configure button, then Save, and reload the device view or refresh page for all of the new settings to appear.
If you prefer not to use the custom driver, you can try out this Z-Wave Universal Device Scanner to access any parameters that may not be available yet in the custom driver. Please note that use of this driver is intended for expert users; use at your own risk: https://community.hubitat.com/t/release-z-wave-universal-device-scanner/97912
Let us know if you have any questions!
