This is product is discontinued and replaced with ZSE11.
Your ZSE40 4-in-1 Sensor will pair to Hubitat easily as it is officially integrated. If any of the advanced settings don't display for you out of the box, you can use the custom driver instead.
First, please make sure that your Hubitat platform is updated to the latest version. Here is how to install and assign the custom driver to the ZSE40 sensor so that you can access all of the settings:
-
Open Hubitat in your browser.
-
Click on Drivers Code in the side menu.
-
In the top right corner, click on "+New Driver" and paste the code from this link to access the code for the driver, then copy ALL of the code from the page.
-
Click Save in the top right corner.
-
You'll see a Zooz ZSE40 4-in-1 Multisensor in your Drivers Code list now.
-
Assign the driver to the device by opening to the device view and selecting the Zooz ZSE40 4-in-1 Multisensor from the drop-down menu under Type (scroll all the way down to User Drivers).
-
Click Update Device.
-
Don't skip this step: Click the Configure button, then Save, and reload the device view or refresh page for all of the new settings to appear.
-
You will now see the additional setting display in the device view in Hubitat where you can customize the sensor.
-
Once done, click Update Device again.
If you prefer not to use the custom driver, you can try out this Z-Wave Universal Device Scanner to access any parameters that may not be available yet in the custom driver. Please note that use of this driver is intended for expert users; use at your own risk: https://community.hubitat.com/t/release-z-wave-universal-device-scanner/97912
Let us know if you have any questions!
