How to Program Your ZEN34 Remote Switch on Hubitat

After you've added and assigned the correct device type to your Remote Switch, you'll be able to program the paddles to control other devices or scenes. Here is an introduction to the process.

At the moment, you'll only be able to use the button controller features of the device since direct association is not available on Hubitat yet. The platform only supports a single or double press, held, and released triggers for buttons so the documented 3, 4, or 5-taps won't be exposed in Hubitat.

The easiest way to program the Remote Switch is with the Rule Machine app:

Click on Apps in the side menu
Click on "+ Add Built-in App" in the top right corner
Select Rule Machine
Click on the Rule Machine app under Apps now that you've added it
Click on Create New Rule
Enter a name for the rule
Click on Select Trigger Events: Click to set
Under Select capability for new Event Trigger, select Button
Under Button Device: Click to set, select the Remote Switch (as you named it) and click Update
Enter the Button number you'd like to use as trigger where button 1 refers to the upper paddle and button 2 refers to the lower paddle on the Remote Switch
Select the button trigger under Button pushed/held/doubleTapped/released
Click on Done with this Trigger Event
Add any more triggers or conditions to the automation and click on Done with Trigger Events
Click on Select Actions to Run: Click to set and follow the prompts on the screen to select the devices or scenes you would like to control with your button trigger
Click Done once you've completed programming all of the actions
Wake the Remote Switch up by clicking the upper paddle 7 times quickly (the LED indicator will remain solid blue for 30 seconds or until you press any of the paddles)

If you prefer not to use the custom driver, you can try out this Z-Wave Universal Device Scanner to access any parameters that may not be available yet in the custom driver. Please note that use of this driver is intended for expert users; use at your own risk: https://community.hubitat.com/t/release-z-wave-universal-device-scanner/97912

Let us know if you have any questions!