Your ZEN15 Power Switch works great with Home Assistant, and it's fast and easy to include!
Zooz products are now officially integrated with the new ZWaveJS integration of Home Assistant. If you're experiencing issues with accessing the advanced settings of your ZEN15, we would recommend first updating to the JS integration then excluding and re-including your Power Switch to your network in order for it to be recognized correctly.
After powering it up by plugging it into a grounded receptacle, you can add the device to your system using these steps:
- In Home Assistant: open Configuration > Integrations > Z-Wave JS > Configure.
- Click on Add node.
- Click on Start Inclusion to initiate pairing.
- While the system is in inclusion mode, press the Z-Wave button 3 times very quickly (LED indicator will start flashing)
- Home Assistant will confirm a successful inclusion
* If you’re using an S2 hub, it will ask you to enter the DSK PIN or scan the QR code printed on the plug.
Once the device has been added to your hub, you'll be able to create rules for it, control it remotely, and customize it via the advanced settings. If you'd like to set up notifications for your Power Switch, check out this helpful blog created by one Home Assistant user!
If you are having issues adding the device to your network, the first thing to try is exclusion which is a type of Z-Wave reset.
Please don’t hesitate to contact us if you need help pairing your switch to Home Assistant, or if you have any other questions!