Ready to add your new ZEN76 Switch to your Z-Wave network? Let's do it!

To access all of the advanced settings available for the ZEN76 Switch, you'll want to install the new Edge drivers! It's quick and easy, simply follow the steps found here.

With the handler installed, your ZEN76 should pair without a problem:

1. Tap the plus icon in the home screen
2. Tap Add device
3. Tap "Scan QR code"
4. Scan the QR code on the front of the switch or printed on the box for the ZEN76
5. Follow the prompts on the screen to complete the set-up: if prompted to activate the device, please tap the UPPER paddle 3 times as quickly as possible
6. The app will indicate when the device connects
7. Tap Edit to rename the device, and tap Done to save the name
8. Tap Done to complete the setup

If you have any issues including via the QR code, please try manual inclusion:

1. Tap the plus icon in the home screen
2. Tap Device
3. Tap "Scan nearby" (in the corner of the screen)
4. While the app says "Scanning...", tap the UPPER paddle 3 times as quickly as possible
   • The LED indicator should flash in blue to confirm it has signal communication. Once paired, it will flash green 3 times. If inclusion fails, it will flash red 3 times.
5. The app will indicate when the device connects
6. Tap Edit to rename the device, and tap Done to save the name
7. Tap Done to complete the setup

Questions? Reach out to us!