Change the settings on your ZEN77 Dimmer to however you see fit!
Zooz products are now officially integrated with the new ZWaveJS integration of Home Assistant. If you're experiencing issues with accessing the advanced settings of your ZEN77 S2 Dimmer we would recommend first updating to the JS integration then excluding and re-including your device to your network in order for it to be recognized correctly.
All of the S2 Dimmer's settings should be there, ready to change after inclusion. If some settings aren't available for you, you can use an alternative method to make adjustments to your ZEN77's settings.
You can now change any parameter manually on the JS Z-Wave integration for Home Assistant.
It needs to be done in Z-Wave JS UI and it’s not possible to do this within HA directly at the moment:
- Under node, scroll down below any exposed settings for the device (under Configuration) to the Custom Configuration section as shown in the screenshot here, where you'll see Value, Parameter and Size.
- You can enter the data according to the product documentation and click SET for the parameter to be updated.
- If you have a battery-powered device, you'll need to wake it up by performing the same activation sequence as during inclusion.
The ZEN77 S2 Dimmer supports OTA updates, so if you're on an older firmware version and would like access to the latest advanced setting options we recommend updating your switch.
Please don't hesitate to reach out to us if you have any questions! We'll be happy to help.
