This is product is discontinued and replaced with ZSE70. What does that mean?
Zooz products are officially integrated with the new ZWaveJS integration of Home Assistant. If you're experiencing issues with accessing the advanced settings of your ZEN75 we would recommend first updating to the JS integration then excluding and re-including your device to your network in order for it to be recognized correctly.
Inclusion Steps
-
In Home Assistant: open Settings > Devices & Services > Z-Wave.
-
Click Add Device > Search for Device.
-
While the system is searching for a new device, click the tamper switch 3 times quickly
-
Home Assistant will confirm a successful inclusion
*If you’re using an S2 hub, it may ask you to enter the DSK key printed on the back cover sticker to complete secure inclusion.
Once the Outdoor Motion Sensor has been added to your hub, you'll be able to create rules for it, control it remotely, and customize it via the advanced settings. To access of all the sensor's advanced settings and get full functionality, you will need to download the device specific code for it.
If you are having issues adding the sensor to your network, the first thing to try is exclusion which is a type of soft Z-Wave reset.
Once the sensor is added, note that it won't report motion via binary sensor. It will rather report motion via burglar notifications where values 0 and 8 translate to no motion/motion. Here's more about this from the HA community.
Please don’t hesitate to contact us if you need help pairing your device to Home Assistant, or if you have any other questions!
