Have your Scene Controller added in no time!
Zooz products are officially integrated with the ZWaveJS integration of Home Assistant - including the ZEN32 Scene Controller. If you have any trouble accessing the advanced settings of your Scene Controller, we would recommend first updating to the JS integration then excluding and re-including your device to your network in order for it to be recognized correctly.
Use these easy steps to pair the ZEN32 to your Home Assistant network:
- In Home Assistant: open Configuration > Integrations > Z-Wave JS > Configure.
- Click on Add node.
- Click on Start Inclusion to initiate pairing.
- Click the main switch button on the device 3 times very quickly (LED indicator will start flashing)
- Home Assistant will confirm that the switch was added, and it will be immediately visible in your device list.
* If you’re using an S2 hub, it will ask you to enter the DSK PIN or scan the QR code printed on the metal faceplate of the switch to complete SmartStart inclusion. \
If your ZEN32 Scene Controller has difficulties being added to Home Assistant, try excluding it first. The steps for exclusion can be found here and will help reset the device and fix any configuration issues.
Send us a message if you have any questions!
